Antimagnetic latching relay with contact form 1A1b at a reasonable price

Basic DataDimension(mm)32×35.5×16.5Weight ( g )≈35gContact Arrangement1A/1BContact MaterialAgSnO2Ambient Temperature-45~+85ºCVibration10~50Hz,0.075mmShock1000m/s²,(100g)Specification DataNominal Voltage9~36VDCPower Consumption<1.5WOperating Voltage7.2VMax. Motor Voltage36VMax. Switching Current90AS

Featured Products

Anti-Magnetic Latching Relay with Contact Form 1A1b at Reasonable PricesAnti-Magnetic Latching Relay with Contact Form 1A1b at Reasonable PricesAnti-Magnetic Latching Relay with Contact Form 1A1b at Reasonable Prices
Basic DataDimension(mm)32×35.5×16.5
Weight ( g )35g
Contact Arrangement1A/1B
Contact MaterialAgSnO2
Ambient Temperature-45~+85ºC
Vibration10~50Hz,0.075mm
Shock1000m/s²,(100g)
Specification DataNominal Voltage9~36VDC
Power Consumption<1.5W
Operating Voltage7.2V
Max. Motor Voltage36V
Max. Switching Current90A
Surge Current2500A/10ms
Motor Resistance(R±15%)60Ω
Contact Voltage<60mV
Contact Resistance<0.6
Dielectric StrengthMotor to Contact>4000VAC   1min
Across Open Contact>2000VAC   1min
Electrical Life>10000cycles
Mechanical Life>100000cycles
Pulse Time100ms~150ms
Picking-up Time<65ms
Release Time<65ms
Insulation Resistance>1000MΩ(500VDC)

Anti-Magnetic Latching Relay with Contact Form 1A1b at Reasonable PricesAnti-Magnetic Latching Relay with Contact Form 1A1b at Reasonable PricesAnti-Magnetic Latching Relay with Contact Form 1A1b at Reasonable PricesAnti-Magnetic Latching Relay with Contact Form 1A1b at Reasonable PricesAnti-Magnetic Latching Relay with Contact Form 1A1b at Reasonable PricesAnti-Magnetic Latching Relay with Contact Form 1A1b at Reasonable Prices           Cautions of Latching Relay:

             1.Suggestions of relay's input
            (1)Polarity-Please check the polarity inside of our technical specification, if single coil then"+ -" or "- +"are fine,
            you can change it by one pulse.If double coil then it's necessary to confirm "-+-" or "+-+"before leaving the our factory.
            (2)Driving-Please energize the relay at our recommend pulse width, rated voltage for reliable performance, if 1.5
            times or 2 times of value or lower driving condition plz confirm with our engineer.
            (3)Relays'contact status may be changed during transportation or installation due to impact of external force,
            therefore please reset to the required status.
 
            2.Suggestions of relay's output
            (1)When choosing the relay with hard connection,please avoid the external force on load terminals during or after
            the installation.
            (2)When the relay will be connected with screw or bolts to the relays' terminals, plz make sure your connection is
            fastened and prevent relay from damages or other safety problems due to temp. Rise..
            (3)The sampling signal wires of products are limited, please do not pull or torque during installation.

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours